shop-talk
[Top] [All Lists]

Re: [Shop-talk] abrasive blasting with a pressure washer

To: FRED E THOMAS <frede.thomas2@verizon.net>, Doug Braun
Subject: Re: [Shop-talk] abrasive blasting with a pressure washer
From: Doug Braun <doug@dougbraun.com>
Date: Sun, 1 Jul 2007 12:17:28 -0700 (PDT)
I believe that one advantage of the wet setup is that
you can use regular sand, because it will not create
dust (just mud).

But even so, you would not want to let it all dry and
then sweep it up.

Doug


--- FRED E THOMAS <frede.thomas2@verizon.net> wrote:

> Rich, I agree with Doug, very messy set-up,
> especially inside a building and 
> on steps it will be going every place, never used
> this type with a pressure 
> washer, but I would also "NEVER" use "SAND" no
> matter for what needed 
> blasting, can be very harmful to your health, not a
> good product.  "FT" 
_______________________________________________

Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

<Prev in Thread] Current Thread [Next in Thread>