> Do not throw the metal pipe away. Leave the zerk coupler on the end
> of the pipe, get a regular hardware store 1/8in pipe coupling,
> screw it on the other end of the pipe, and then get a 1/8in pipe
> thread grease zerk to go in the pipe coupling.
I've found that a couple of 45 degree 1/8" pipe ells come in handy sometimes,
too. Basically a swivel joint, but stiff enough to push the coupler on at an
angle.
> Sorry, a flash back to a bad maintenance moment. The calm-yourself
> drugs are kicking in now.
Ah yes, better living through Chemistry !
Randall
|