shop-talk
[Top] [All Lists]

Re:Engineering 101

To: shop-talk@autox.team.net
Subject: Re:Engineering 101
From: Chris Kantarjiev <cak@dimebank.com>
Date: Mon, 25 Jul 2005 11:15:04 -0700 (PDT)
> >   What I need to figure out is how to make a 90degree turn and turn a shaft
> > with some gears.  I have a 1/2" shaft coming out of a I-beam that goes into
> > a frame about 4 inches, it needs to turn a threaded rod that is at
> > 90degrees to that shaft.

Bevel gears would work, but you might also be thinking of a worm
to turn a straight gear.

http://auto.howstuffworks.com/gear5.htm

http://www.atmsite.org/contrib/JSAPP/wormgear/wormgear.html






<Prev in Thread] Current Thread [Next in Thread>