shop-talk
[Top] [All Lists]

Re: o/t: Battery cut off switch.

To: ianmiller07@hotmail.com, shop-talk@autox.team.net
Subject: Re: o/t: Battery cut off switch.
From: LSAPEX@aol.com
Date: Mon, 22 Mar 2004 11:22:19 EST
The switch uses 3/8" ring terminals.

The clamps will fit either terminal.

4 ga should be sufficient.
I looked at the battery cables yesterday and they said they were 1 GA.  I 
though most battery cables were 4-6 ga.  I can't find any terminals for a 1 
GA wire.  Also I thought the pos and neg terminals were different sizes on 
most batteries.  All the clamp and solidier on terminals I can find are 
universal.  Will these work properly?  Finally I'm looking at the Cut off 
switch from Pegasus pn 4431.  Does anyone know what diameter the studs are 
on that switch so I can order the properly sized ring terminals?

Thans for all your help.

Les.
apexautoeng.com






<Prev in Thread] Current Thread [Next in Thread>