shop-talk
[Top] [All Lists]

Cleco's was autobody panel recommendation wanted

To: eabb@loc.gov
Subject: Cleco's was autobody panel recommendation wanted
From: Gt6steve@aol.com
Date: Wed, 22 Oct 2003 11:46:45 EDT
Hey Gene,
Once you use Cleco's you'll never want to be without them again!!  Primarily 
intended to hold future riveted joints in alignment they've expanded the 
catalog to include some nifty clamps as well.  The system is so cheap why 
bother 
with no-name.  Eastwood is pretty good stuff and probably Cleco anyway but I 
bought 1/8 and 3/16 pins for about a buck each and the pliers were about 
fifteen 
Dollars.  Probably Pegasus Racing but I don't remember for sure now.
Whatever you get, if you do any fabrication you'll LOVE them.

Steve in Las Vegas

<< 
 Listmembers:
 
 Has anyone used the autobody panel fastening system for overlapping
 panels that requires a 1/8 hole drilled through both panels and then a
 removable "rivet" or "pin" device is installed with a special "rivet
 gun" to keep the panels tight together.  One brand was either Cleco or
 Kleco.  Eastwood makes a no-name brand set I was thinking of getting.
 
 Anyone tried this set or can someone recommend a place to get a better
 kit?  Thanks,
 
 Gene >>





<Prev in Thread] Current Thread [Next in Thread>
  • Cleco's was autobody panel recommendation wanted, Gt6steve <=