Jim & Nadia Higgins [mailto:seamus@iwaynet.net] wrote:
>
> Instead of messing with the JB Weld, I would suggest using threaded rod or,
> if you want a harder grade, adding threads to a long bolt so that it
> bottoms in the hole. You could then cut the bolt off and grind it flush to
> have a better base to tap into.
This probably wouldn't work very well with a Lotus aluminum head with the
integral
cast intake "manifolds" (runners, etc.). The only two reasonable options would
be to make an adapter plate, of weld and redrill for new holes. In my
experience,
I wouldn't count on the JB Weld...
Tim Mullen
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/shop-talk
|