shop-talk
[Top] [All Lists]

Re: getting things "square"

To: epetrevich@relavis.com
Subject: Re: getting things "square"
From: Scott Hall <sch8489@garnet.acns.fsu.edu>
Date: Tue, 14 Nov 2000 14:37:23 -0500 (EST)
On Tue, 14 Nov 2000 epetrevich@relavis.com wrote:

> I was building a server cabinet and fish tank stand this weekend and I was
> having a hell of a time getting/keeping things square.  I have a level
> table to work on, but once I got to adding legs and such in the 3rd
> dimension, I was having a hell of a time.  I can't measure cross corners
> because the other corner isn't build yet.

inch,

at work we generally set the part to be welded on the huge ex-i.b.m.
robotics table (perfectly flat) and tack a corner.  then bend tack weld to
get perfectly level/square, then have somebody hold it (if necessary) and
tack the opposite corner, then the other two corners, sort of the same
pattern you'd use to put on lug bolts.  then you weld the whole thing.
lemme know if it sounds confusing, I'll try to explain it better.  seems
to work well, though.

parts to be welded together that have to be flat in relation to each other
get held to the table with bolt-on clamps.  it works great at work, but
I'm not sure how you'd duplicate it at home.  I'm still trying to figure
out a good way.  unless I can find another one fo those tables locally,
that is.

scott

<Prev in Thread] Current Thread [Next in Thread>