shop-talk
[Top] [All Lists]

Re: Setting up air lines in the shop

To: LSAPEX@aol.com
Subject: Re: Setting up air lines in the shop
From: "William M. Gilroy" <wmgilroy@lucent.com>
Date: Wed, 05 Jan 2000 21:12:29 -0500
If you decide to put you compressor out side you can get a
pre-formed concrete slab from HVAC guys.  Not sure of the
cost but it might be easier than pouring your own.  Just
an idea, but I have not tried it, SYMMV.

Bill Gilroy

LSAPEX@aol.com wrote:
> 
> Works great. If you live in the cold weather climates and the shack is not
> heated, keep the tank drained and use a synthetic oil in the compressor. I
> had to switch to 0w-30 Mobile 1 to ease start up on cold winter mornings.
> 
> Les.
> 
> <<
>  -> Do what I did, concrete pad, compressor OUTSIDE, You'll understand
>  -> one day.......DK (A little deaf.........:)
> 
>   That's where I put mine - in the little storage shed next to the shop.
>  A friend built a little "outhouse" to cover his compressor, which he put
>  outside on its own midget concrete slab. >>

<Prev in Thread] Current Thread [Next in Thread>