shop-talk
[Top] [All Lists]

Fw: Flowbench & Engine Dyno

To: "shop-talk" <shop-talk@autox.team.net>
Subject: Fw: Flowbench & Engine Dyno
From: "Rex Burkheimer" <rex@inoli.com>
Date: Thu, 12 Aug 1999 08:06:30 -0500

Rex Burkheimer
 J-CON Coordinator, WM Automotive Whse      Fort Worth TX
Texas Region SCCA     FC #19  ITB #49
rex@inoli.com  rburkheimer@hotmail.com

So you're a feminist...Isn't that cute!
----- Original Message -----
From: Rex Burkheimer <rex@inoli.com>
To: Chris Crisenbery <ffajackson@absolute-net.com>
Sent: Wednesday, August 11, 1999 4:54 PM
Subject: Re: Flowbench & Engine Dyno


> Chris
>     I can't contribute much, but I have also been looking for this
> information. I did find a great website on flowbenches:
> http://www.superflow.com/support/support-flowbench-faq.htm
>
> Also, although it's not a real shop dyno, this is a pretty intriquing
site:
> http://www.charm.net/~mchaney/homedyno/dynokit.htm
>
>
>
> Rex Burkheimer
>  J-CON Coordinator, WM Automotive Whse      Fort Worth TX
> Texas Region SCCA     FC #19  ITB #49
> rex@inoli.com  rburkheimer@hotmail.com
>
> So you're a feminist...Isn't that cute!
> ----- Original Message -----
> From: Chris Crisenbery <ffajackson@absolute-net.com>
> To: <shop-talk@autox.team.net>
> Sent: Wednesday, August 11, 1999 1:05 PM
> Subject: Flowbench & Engine Dyno
>
>
> >
> > Thought I would start a new thread, looking at building (or buying) a
> > flow bench for small bore cylinder heads and a dyno for 4 cylinder
> > engines. I have collected a few articles on the flowbench but they tend
> > to differ quite a bit on how they measure flow and what equipment I
> > need. So I'm looking for input from my fellow shop-talkers.
> >
> > Thanks
> >
> > Chris, Rascal Racing
> >
>


<Prev in Thread] Current Thread [Next in Thread>