shop-talk
[Top] [All Lists]

Re: new toy

To: Kelley Mascher <mascher@u.washington.edu>
Subject: Re: new toy
From: Bob Hamilton <hamilton@cast.navnet.net>
Date: Fri, 17 Oct 1997 15:29:32 -0300
Kelly and Others,

        Be really careful with these puppies as I have been using one for
over twenty years until this past April when it kicked on me and I removed
my big toe and half of the one next to it on my left foot. Not a good
experience - 12 days in hospital, infections, blood clots, etc. I now have
a left foot that I can place a right shoe on! Both my feet "slope" the same
way.

Later,
Bob


At 08:53 AM 10/17/97 -0700, you wrote:
>I bought one of those about 2 years ago. I've probably cut about
>two cords of wood with it plus two 20" x 40' elms in my backyard.
>
>When I got the saw I bought a gallon of the cheap Home Depot
>bar oil. I still have about half of it left. This oil is very
>sticky much like way oil on a lathe or mill. It seems like 
>cheap insurance since anything else is just going to be thrown
>off the chain. 
>
>Kelley Mascher                                            (206) 528-2713
>Children's Hospital & Med. Center               mascher@u.washington.edu
>Audiology Research                              Seattle, Washington USA
>
>On Thu, 16 Oct 1997, Mark Miller wrote:
>
>> Date: Thu, 16 Oct 1997 16:05:04 -0700
>> From: Mark Miller <markm@tutsys.com>
>> To: 'shop talk mailing list' <shop-talk@autox.team.net>
>> Subject: new toy
>> 
>> Hi.  I bought a cheap electric chain saw (Why?  I still don't really know, 
>> except that I've always thought I should have one) and have some lube 
>> questions.  It said to use their brand of chain saw oil.  What should I 
>> really use?  10W30? 30W? Other engine oil?  2 stroke oil?  And for the bar 
>> end grease: standard moly? lithium? just spit on it now and again?
>> 
>> thanks in advance.
>> 
>> Mark 'leatherface' Miller
>> 
>> 
>
>
>
================================================
Robert A.C. Hamilton, P.O. Box 202, Waverley, Nova Scotia, B0N 2S0
Home Page: http://cast.navnet.net/~hamilton/index.html
E-Mail: hamilton@cast.navnet.net
Tel: 902-861-3277  Fax: 902-861-1361
================================================

<Prev in Thread] Current Thread [Next in Thread>