Now that you mention it, I don't remember seeing much livestock roaming the
streets the last time I was in Boston. . .
Mark Noakes
On Tue, 04 December 2001, Wayne Osborne wrote:
>
> Bruce,
> SInce the full setup isn't what you're looking for...please go to
> http://www.chevytrucks.org/wayne/48trucks.html
> Grant Parsons has a shorter setup with the side board.
> Go to the list members page and lo and behold---our leader, Miq's 57
> has a shorter setup as well. Here's the URL
> http://www.chevytrucks.org/wayne/member.html
> go down and take a look at Miq's 57 setup...
> THen travel down to Randy Boersig's 47-shorter setup as well.
> Scott Muentnich-53, short but a little different..
>
> Hope this helps ya some... --wayne
>
>
> At 12:29 AM 12/4/01 -0500, Bruce Marshall wrote:
> >Thanks for the info Mark.
> >
> >I guess what I am looking for isn't a full farm-like stake setup but rather
> >just a couple of rails mounted on 2" x 2" uprights on both sides of the bed.
> >I'm not going to be hauling any hay around here in the big city!
> >
> >Bruce Marshall
> >Boston, MA
> >'51 Chevy AD 1/2 ton
> >
> >----- Original Message -----
> >From: <mark@noakes.com>
> >To: <oletrucks@autox.team.net>
> >Sent: Monday, December 03, 2001 11:46 PM
> >Subject: Re: [oletrucks] truck pictures needed
> >
> >
> > > check the chevytrucks.org website for my brother's truck under my name. .
> >.it still has the orginal stakes that the original owner put on it in 1957
> >(and these were transferred from his older truck). I assume that the design
> >would work on the AD's as well as TF's since these actually came off an
> >older truck. My brother bought the truck from the farmer who was the
> >original owner so the info is solid. The stake sides are oak painted black
> >and have stood up well to time. Brian is off busy working but in a few
> >weeks I could get him to take some detail pictures that I could scan and
> >send to you.
> > >
> > > Mark Noakes
> > > 58/56 Chevy Suburban
> > > 59 GMC Suburban
> > > Knoxville,TN
> > >
> > >
> > > On Mon, 03 December 2001, "Bruce Marshall" wrote:
> > >
> > >
> > >
> > > >
> > >
> > > > Now that I have my '51 p/u back on the road I want to make wooden stake
> > >
> > > > sides (is that what it's called?) for the bed. Is there any "right" way
> >to
> > >
> > > > build these? Does anybody have pictures of this kind of thing that they
> > >
> > > > could forward to me or direct me to a web address?
> > >
> > > >
> > >
> > > > I'm thinking about using oak for the wood and carriage bolts for the
> > >
> > > > hardware.
> > >
> > > >
> > >
> > > > Bruce Marshall
> > >
> > > > Boston, MA
> > >
> > > > '51 Chevy AD 1/2 ton
> > >
> > > > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> > > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> >oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> Wayne Osborne
> 1956 Chevy Pickup
> LaGrange Ga.
> http://www.chevytrucks.org
> http://www.chevytrucks.org/wayne
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|