Bruce,
SInce the full setup isn't what you're looking for...please go to
http://www.chevytrucks.org/wayne/48trucks.html
Grant Parsons has a shorter setup with the side board.
Go to the list members page and lo and behold---our leader, Miq's 57
has a shorter setup as well. Here's the URL
http://www.chevytrucks.org/wayne/member.html
go down and take a look at Miq's 57 setup...
THen travel down to Randy Boersig's 47-shorter setup as well.
Scott Muentnich-53, short but a little different..
Hope this helps ya some... --wayne
At 12:29 AM 12/4/01 -0500, Bruce Marshall wrote:
>Thanks for the info Mark.
>
>I guess what I am looking for isn't a full farm-like stake setup but rather
>just a couple of rails mounted on 2" x 2" uprights on both sides of the bed.
>I'm not going to be hauling any hay around here in the big city!
>
>Bruce Marshall
>Boston, MA
>'51 Chevy AD 1/2 ton
>
>----- Original Message -----
>From: <mark@noakes.com>
>To: <oletrucks@autox.team.net>
>Sent: Monday, December 03, 2001 11:46 PM
>Subject: Re: [oletrucks] truck pictures needed
>
>
> > check the chevytrucks.org website for my brother's truck under my name. .
>.it still has the orginal stakes that the original owner put on it in 1957
>(and these were transferred from his older truck). I assume that the design
>would work on the AD's as well as TF's since these actually came off an
>older truck. My brother bought the truck from the farmer who was the
>original owner so the info is solid. The stake sides are oak painted black
>and have stood up well to time. Brian is off busy working but in a few
>weeks I could get him to take some detail pictures that I could scan and
>send to you.
> >
> > Mark Noakes
> > 58/56 Chevy Suburban
> > 59 GMC Suburban
> > Knoxville,TN
> >
> >
> > On Mon, 03 December 2001, "Bruce Marshall" wrote:
> >
> >
> >
> > >
> >
> > > Now that I have my '51 p/u back on the road I want to make wooden stake
> >
> > > sides (is that what it's called?) for the bed. Is there any "right" way
>to
> >
> > > build these? Does anybody have pictures of this kind of thing that they
> >
> > > could forward to me or direct me to a web address?
> >
> > >
> >
> > > I'm thinking about using oak for the wood and carriage bolts for the
> >
> > > hardware.
> >
> > >
> >
> > > Bruce Marshall
> >
> > > Boston, MA
> >
> > > '51 Chevy AD 1/2 ton
> >
> > > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
Wayne Osborne
1956 Chevy Pickup
LaGrange Ga.
http://www.chevytrucks.org
http://www.chevytrucks.org/wayne
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|