oletrucks
[Top] [All Lists]

Re: [oletrucks] hub caps for the 62

To: "Don Simmons" <tasimmons@cbnn.net>
Subject: Re: [oletrucks] hub caps for the 62
From: "joe" <chevy1@jps.net>
Date: Thu, 4 May 2000 20:31:59 -0700
Don

I just thought of something I have to go and give an estimate to build a 62
Fleetside for a guy tomorrow and he has a 327 installed with the factory
torsion bar front suspension.  I check his mounts and see if mine are the
same.

Joe
http://chevy1.freeservers.com/
http://jeepster.freeservers.com/
http://50chevy.freeservers.com/
----- Original Message -----
From: Don Simmons <tasimmons@cbnn.net>
To: joe <chevy1@jps.net>
Sent: Thursday, May 04, 2000 7:32 PM
Subject: Re: [oletrucks] hub caps for the 62


> Joe,Hi this is Don Simmons again! This time my question is about motor
> mounts. I read here that you have a friend that has several 62-64 trucks.I
> am restoring a 62 Fleetside shortbox and am putting in a 350/350auto. I am
> looking for side motor mounts for the V8 that fit the torsion bar frame of
> the 62. I have been told that V8s with manual trans had the front cradle
> mount but the V8 trucks that came with a powerglide automatic had the side
> mounts. So I'm looking for one of those rare powerglide trucks to rob the
> frame mounts. The mounts will only fit a 60-62 because of the torsion bar
> suspension on those trucks. So if you happen to see some I would be very
> happy to hear from you. If I can't find any by the time I get close to
> putting the motor in I will have to try to find some type of aftermarket
> mount. Anyway thanks if you can help,
> Don Simmons
> 1953 3100
> 1962 C10 etc.
> ----- Original Message -----
> From: "joe" <chevy1@jps.net>
> To: "john j tonyes" <flfox1@juno.com>; <oletrucks@autox.team.net>
> Sent: Thursday, May 04, 2000 8:13 AM
> Subject: Re: [oletrucks] hub caps for the 62
>
>
> > John
> >
> > I have a friend that has around 5 or 6 Chevy's of the 62-64 year model
and
> > I'll check with him about the hub caps.
> > Most of my 1954 parts are Way, Way back of the storage room but If I can
> get
> > to them I'll check  because I know theirs a radio or two in the boxes.
> >
> > Joe
> > http://chevy1.freeservers.com/
> > http://jeepster.freeservers.com/
> > http://50chevy.freeservers.com/
> > ----- Original Message -----
> > From: john j tonyes <flfox1@juno.com>
> > To: <chevy1@jps.net>
> > Sent: Thursday, May 04, 2000 4:11 AM
> > Subject: Re: [oletrucks] Paint chip color help!
> >
> >
> > > I have a 54 and you must be talking about the interior.  Yes, it was
> > > about what you are talking about.  I am looking for a radio and hub
> cvaps
> > > for my 54 and also hubcaps for my 62.
> > >
> > > John flfox1@juno.com
> > >
> > > On Wed, 3 May 2000 21:33:46 -0700 "joe" <chevy1@jps.net> writes:
> > > > I have a person who's contacted me through my webpage asking for
help
> > > > in
> > > > locating the original color on his 1954.      He say's the original
> > > > color
> > > > was, the ivory-with-a-touch of yellow( lemon creme?).  What was this
> > > > color
> > > > called and is there a paint number I can give to the painter?
> > > >
> > > > Joe Garcia
> > > > 1950 Chevrolet 3100
> > > > Yuba City, CA
> > > > http://chevy1.freeservers.com/
> > > > http://jeepster.freeservers.com/
> > > > http://50chevy.freeservers.com/
> > > >
> > > > oletrucks is devoted to Chevy and GM trucks built between 1941 and
> > > > 1959
> > >
> >
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
>

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>