Re: hubs inquiry

[Jared Finesmith <Jared_Finesmith@bc.sympatico.ca>]

On April 16, 97 Dave Vodden wrote:
>is anyone aware of why they undo (or tighten up for that matter) in the way
they do?  After all the wheel is on a spline on the hub so wheel and hub and
spinner rotate as one when you have given then a good few hard belts so they
are real tight.<

Long ago I asked someone at the Mog factory about this, and they replied:
(paraphrased) that 'if there is any vibration or shimmy in the wheel, the
hubs will tend to rotate in the direction of the