MGB heater valve

[Barrie Robinson <barrier@bconnex.net>]

I have made the prototype heater valve and it works absolutely marvelously !!!
BUT......I cannot find the bit that bolts to the back of the Edelbrock (and 
presumably others) intake manifold.  This is held with two bolts (with 
gasket) and gives an off-take for a 5/8 hose.  I want to stick the 'new' 
heater valve on there.  I have made some copper flanges which will be 
drilled (5/8) and copper pipe soldered on to which the valve will be 
soldered.   This, however is arduous, and ready made (brass!) ones would be 
a great help.

I do have a grotty example that Ted Schumacher sent to me and I can send a 
picture of it to anyone interested

Regards
Barrie

Barrie Robinson
barrier@bconnex.net 
///
///  mgb-v8@autox.team.net mailing list
///  Send admin requests to majordomo@autox.team.net
///  Send list postings to mgb-v8@autox.team.net
///  Edit your replies!  If they include this trailer, they will NOT be sent.
///