The Jeep CJ-5/7s had a track width close to what you are looking for but I
don't remember the specifics anymore.
James Nazarian
71 MGB Tourer
71 MGBGT V8
85 Dodge Ram
----- Original Message -----
From: "Jim Stuart" <vze3swyy@verizon.net>
To: "Mgbv8 List (E-mail)" <MGB-V8@autox.team.net>
Sent: Tuesday, May 20, 2003 12:11 AM
Subject: FW: Rear Ends
> -----Original Message-----
> From: Jim Stuart [mailto:vze3swyy@verizon.net]
> Sent: Tuesday, May 20, 2003 12:10 AM
> To: 'Glenn'; 'mgb-v8@autox.team.net'
> Subject: RE: Rear Ends
>
>
> There have been several articles in the past in our V8 Newsletter. Check
> your back issues. I believe someone used a Chevy Monza rear that was a bit
> wider than a stock B, had the hubs re-drilled to a B pattern.
>
> Jim Stuart
>
> -----Original Message-----
> From: owner-mgb-v8@autox.team.net [mailto:owner-mgb-v8@autox.team.net]On
> Behalf Of Glenn
> Sent: Monday, May 19, 2003 11:14 PM
> To: mgb-v8@autox.team.net
> Subject: Rear Ends
>
>
> Since this question hasn't been asked for...hmm....at
> least 30 minutes, I'll ask.
>
> Does anyone know a site on the net that lists useful
> info on rear ends such as width, location of yoke
> (centered, offset), stock bolt pattern, etc. that is
> sorted by model and year? I've been poking around and
> can't find anything useful. I've searched extensively
> to find the width of a stock S10 rear, but have had no
> luck.
>
> I'm still looking for a rear end and thought since the
> B is currently running great, that I might take the
> time to build my own verses buying one already fabbed.
>
> I'm looking for something around a 3.08, about 1.5"
> wider than a stock B rear to help with my Honda wheels
> (they rub in the back under very hard cornering). Any
> suggestions?
>
> Maybe it is off to the junk-yard this weekend. I'm
> sure my fiance will love that!
>
> Glenn
>
> 26 days till marriage, at least she loves the B
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|