> Is there some universal 'pre-primer' in a handy aerosol can I can spray on
>as a protective finish until I get to the real painting? I'm hoping for
>something that wont interfere with real primer later ... maybe something that
>I can just wipe off with a solvent rag later?
The thing you have to remember with primers is that most of them
actually absorb water, so you won't really be doing much good keeping
the parts primed. This is why a primed car rusts.
You could coat the parts with a light oil and wrap them in plastic,
but obviously then you have to make sure you get all the oil off
before you prime and paint.
That's all I can think of...unless you pick a paint system whose
primer doesn't absorb water...
Have you checked out POR's products?
go here:
http://www.por15.com/
they have a pretty impressive lineup of products. And of course, you
get what you pay for...
I haven't used any of their products yet, but I plan on using their
POR black paint/treatment stuff for my project.
Joe Pitassi
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|