mg-t
[Top] [All Lists]

RE: Source and size of TF screws, bolts & taps

To: "'Jos Wantz'" <Jos.Wantz@mfp.etat.lu>,
Subject: RE: Source and size of TF screws, bolts & taps
From: "Lew Palmer" <lpalmer@mn.mediaone.net>
Date: Mon, 10 Apr 2000 08:43:39 -0500
Or in the US:

for floorboard screws and washers: Todd Clarke, Clarke Spares , 90 West
Swamp Road, Doylestown, PA (215) 348-0595
and for taps & dies: British Tools and Fasteners, LosOsos, CA (sorry, don't
have the number)

Lew Palmer

-----Original Message-----
From: owner-mg-t@autox.team.net [mailto:owner-mg-t@autox.team.net]On
Behalf Of Jos Wantz
Sent: Monday, April 10, 2000 1:26 AM
To: Kevin & Deana Brown; mg-t@autox.team.net
Subject: Re: Source and size of TF screws, bolts & taps




Kevin & Deana Brown wrote:

> Does anyone out there know of a good source of screws (floorboard and
> floorboard angle iron - are these 2BA screws) and taps?  Moss and
> Abington spares don't really show them.  Also what size is the fuel tank
> drain plug threads and where can get a tap - I assume it is some sort of
> a BSP thread?  Someone used and incorrectly sized steal plug which
> leaked and messed up the threads, when I tried to screw in my new brass
> plug, the gummed up threads stripped the plug - which will no be fun to
> get out since it won't unscrew.  Thanks!
>
> Kevin Brown    '54 MGTF 1500 RHD  '64 MGB  '71 MGB V8
> Odessa, MO

Dear friends,
Please try ANGLO-PARTS in MECHELEN (near Brussels in Belgium) fax ++32 15 42
34 45.
They have all the stuff you do not find anywhere else!
Best regards,

Jos Wantz
Luxembourg



<Prev in Thread] Current Thread [Next in Thread>