mg-mmm
[Top] [All Lists]

Re: P-type Exhaust Manifold

To: <mg-mmm@autox.team.net>
Subject: Re: P-type Exhaust Manifold
From: "Dave & Diana Dwyer" <dmdwyer@optusnet.com.au>
Date: Thu, 22 Aug 2002 19:36:40 +1000
References: <7852B6B06E5C99468A91699BBAEB6D6AF2CF3B@concorde.northpark.e du>
Reply-to: "Dave & Diana Dwyer" <dmdwyer@optusnet.com.au>
Sender: owner-mg-mmm@autox.team.net
Phil

In addition to the one on the car, we have two spares. All three have been
cracked, usually at the bottom flange due to the muffler hitting something
solid. I suspect this is a very common problem.

I would suggest that your best course would be to seek out a welder of cast
iron and have yours repaired. If it's beyond repair contact me off-list and
maybe I can help.

Regards

Dave Dwyer
J2 (with a P-type engine!), TA, TC

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/cgi-bin/majorcool
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-mmm
///  Send list postings to mg-mmm@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>