Gents,
I have 2 sets of wheels for my BJ7. A set of wires and a set of minilite
replicas.
Recently, I am having trouble getting the front wheels tight enough. It seems
the thread on the hub is bottoming out in the spinner before it clamps the
wheel properly unless I belt the hell out of it to get it tight enough.
The hubs and spinners have been on the car for over a decade. Car is a daily
driver.
The obvious fix is to file/machine the end of the hub or replace the spinners.
Anyone else have this issue before.
Cheers
Piet
Sent from my iPhone
_______________________________________________
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|