--===============2521712510454635248==
--000000000000521219060037a9a2
Content-Transfer-Encoding: quoted-printable
It also helps to make sure all your throttle linkage bushings are in good
shape
On Tue, Jul 11, 2023 at 10:11=E2=80=AFAM Alan Seigrist <healey.nut@gmail.co=
m> wrote:
> Your pedal will feel sticky because the levers are not properly adjusted.
> The manual explains generally how it should be set up. For best results
> each lever in the linkage should travel the same mirror angle on the axis
> from closed to open - if you adjust each lever this way you will get a fu=
ll
> throttle open. Normally you get stickiness when one of the levers is too
> far forward whilst the throttle is closed, then you push the throttle and
> the angle is too steep. You won't get full throttle this way and the lev=
er
> arm can get stuck.
>
>
> On Tue, Jul 11, 2023 at 8:46=E2=80=AFAM Jim Ryan <ryan@jimryan.com> wrote=
:
>
>> Any advice on lubricating the linkage on the SU's? Would 3 in 1 be
>> sufficient? My pedal feels a bit sticky.
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive/healeys
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>>
>>
--000000000000521219060037a9a2
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr">It also helps to make sure all your throttle linkage bushi=
ngs are in good shape</div><br><div class=3D"gmail_quote"><div dir=3D"ltr" =
class=3D"gmail_attr">On Tue, Jul 11, 2023 at 10:11=E2=80=AFAM Alan Seigrist=
<<a href=3D"mailto:healey.nut@gmail.com";>healey.nut@gmail.com</a>> w=
rote:<br></div><blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0p=
x 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir=
=3D"ltr">Your pedal will feel sticky because the levers are not properly ad=
justed.=C2=A0 The manual explains generally how it should be set up.=C2=A0 =
For best results each lever in the linkage should travel=C2=A0the same mirr=
or angle on the axis from closed to open - if you adjust each lever this wa=
y you will get a full throttle open.=C2=A0 Normally you get stickiness when=
one of the levers is too far forward whilst the throttle is closed, then y=
ou push the throttle and the angle is too steep.=C2=A0 You won't get fu=
ll throttle this way and the lever arm can get stuck.<div><br></div></div><=
br><div class=3D"gmail_quote"><div dir=3D"ltr" class=3D"gmail_attr">On Tue,=
Jul 11, 2023 at 8:46=E2=80=AFAM Jim Ryan <<a href=3D"mailto:ryan@jimrya=
n.com" target=3D"_blank">ryan@jimryan.com</a>> wrote:<br></div><blockquo=
te class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px =
solid rgb(204,204,204);padding-left:1ex"><div dir=3D"auto">Any advice on lu=
bricating the linkage on the SU's?=C2=A0 Would 3 in 1 be sufficient?=C2=
=A0 My pedal feels a bit sticky.</div>
_______________________________________________<br>
rer" target=3D"_blank">http://www.team.net/donate.html</a><br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/healeys"; rel=3D"noreferre=
r" target=3D"_blank">http://www.team.net/pipermail/healeys</a> <a href=3D"h=
ttp://autox.team.net/archive/healeys" rel=3D"noreferrer" target=3D"_blank">=
http://autox.team.net/archive/healeys</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net"; target=3D"_blank">Healeys@autox.t=
eam.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys"; rel=3D"noreferre=
r" target=3D"_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
s/healey.nut@gmail.com" rel=3D"noreferrer" target=3D"_blank">http://autox.t=
eam.net/mailman/options/healeys/healey.nut@gmail.com</a><br>
<br>
</blockquote></div>
</blockquote></div>
--000000000000521219060037a9a2--
--===============2521712510454635248==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============2521712510454635248==--
|