[Healeys] clutch

[healeymanjim via Healeys <healeys@autox.team.net>]

i take a slightly longer bolt and run a nut up tight against the head which i 
use on the top bolt of the slave cylinder.  this 
allows the head of the bolt to stick out enough so i can reach it from 
underneath.  do not have to remove tunnel to get to it.
_______________________________________________

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys