healeys
[Top] [All Lists]

[Healeys] Rocker Cover Poll

Subject: [Healeys] Rocker Cover Poll
From: sbyers at ec.rr.com (BJ8Healeys)
Date: Sat, 7 Apr 2018 09:32:47 -0400
References: <011c01d3ce64$28aaa5c0$79fff140$@tpg.com.au>
I always glue the gasket to the rocker cover and do not put any adhesive
between the gasket and head.   I've never had a leaking problem and the
cover is easy to remove without damaging the gasket.

 

Steve Byers

HBJ8L/36666

BJ8 Registry

AHCA Delegate at Large

Havelock, NC  

 

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Patrick &
Caroline Quinn
Sent: Saturday, April 07, 2018 7:33 AM
To: healeys at autox.team.net
Subject: [Healeys] Rocker Cover Poll

 

Hello

 

Having a lot of fun trying to stop a leak from the rear of the rocker cover
of the BN3.

 

It's a standard early C-series six-cylinder and pressed steel rocker cover
with dome shape nuts.

 

The question is whether the accepted practice is to stick the cork gasket to
the rocker cover with no jointing compound between the gasket and cylinder
head. OR is the accepted practice to apply jointing compound to both
surfaces?

 

Hoo Roo

 

Patrick Quinn

Blue Mountains, Australia

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20180407/08d92d4f/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>