From: Elton Schulz <eschulz at frontiernet.net>
To: Healey List <healeys at autox.team.net>
Sent: Saturday, March 10, 2018 12:12 AM
Subject: [Healeys] Distributor cap and wires
Fellow Listers,
I recently purchased a new Lucas side entry distributor cap and new
ignition wires. I'm having no success in fastening the wires with the
cap's screws.? The screws are right up against the bottom stops of the
wire holes and the screws have too little wire to bite into. Try as I
might, the wires pull out with no effort.? What am I missing? Should
there be a thimble or sorts or something over the wire's end for the
screw to catch?
Thanks for your help.
Elton
BJ7
?? Cut the wires (longer bare end) and double them over ...doubled up ends
under the screws
Jim
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180310/cc51bf59/attachment.html>
|