what size wires are you attempting to use?
Best--Michael Oritt
On Mar 10, 2018 3:13 AM, "Elton Schulz" <eschulz at frontiernet.net> wrote:
> Fellow Listers,
> I recently purchased a new Lucas side entry distributor cap and new
> ignition wires. I'm having no success in fastening the wires with the cap's
> screws. The screws are right up against the bottom stops of the wire holes
> and the screws have too little wire to bite into. Try as I might, the wires
> pull out with no effort. What am I missing? Should there be a thimble or
> sorts or something over the wire's end for the screw to catch?
> Thanks for your help.
> Elton
> BJ7
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/michael.oritt at gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180310/ca7a232a/attachment.html>
|