Maybe give oven cleaner a try?
On Sun, Mar 4, 2018 at 8:15 PM, Bert Van Brande <bertvanbrande at yahoo.com>
wrote:
>
> As I am ready to replace the stator wiring loom on the 56 100 BN2, I find
> the old loom is completely stuck inside the tube.
> I have no wires left on the trafficator end. Pulling the wire on the
> other end, there is no movement and I am afraid I will break the little
> that is left from the brittle wires. (not that I need them)
>
> Any garage tricks to negotiate these 62 year old wires from the tube? I
> already tried WD40 and some modest heat applied to outside of the tube but
> no luck yet.
>
> Bert
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/healey.nut at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180305/4eb51b2b/attachment.html>
|