Wes -
The bolt goes through the bracket, through the A pillar and through the
windshield mount and fixed with a nut. Actually I think the nut is fixed on
the inside... there is no captive or welded nut here.
Alan
'52 A90
'53 BN1
'64 BJ8
On Fri, Feb 27, 2009 at 9:18 PM, Weston Keyes <westonkeyes@hotmail.com>wrote:
> Hello Folks,
>
> I am restoring a car I didn't take apart. There was body work done
> around
> where the dash ends mount to the body and also the windshield is attached.
> There are 2 cast aluminum brackets that are screwed into the dash and
> attach
> to the body. Was there originally a stud welded to the body that goes
> through
> the hole in the casting? I just have a hole now. If they used a bolt the
> head
> would be covered up by the mounting plate of the windshield. Any clues?
>
> Thanks for your patience.
>
> Wes Keyes
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|