Greg, I have a spare front apron you can borrow if you are anywhere near Va
Beach. Thanks, Hank
Hank Giffin
757-375-1491
-----Original Message-----
From: Fot <fot-bounces@autox.team.net> On Behalf Of Greg Blake via Fot
Sent: Monday, August 24, 2020 9:33 PM
To: Fot <fot@autox.team.net>
Subject: [Fot] TR3 front apron help
Folks. Need some help with the shape of the lower section (below the grill
opening) of the front apron on a large mouth TR3. I cut up and welded new metal
on the front of the race car and Iâ??m pretty sure it is no where near the
stock profile.
My 14 year old son and I are rebuilding his 3 and it has obviously met a few
curbs in it day. The lower section is folded back and I donâ??t have a good
goby to make templates.
Can one of you fellow 3 care takers send us a to scale profile of that lower
section? I think one for middle and one for each side just inside the bumper
plinths would get us close enough. Iâ??d really appreciate the help, so would
Will the owner.
Attached is a photo of Will working the rear corner that had 1/2â?? of bondo
when we stepped the car. He is grinding off the remnants of the studs he used
to pull the dent properly
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|