Hi Greg,
There are a few good angled shots of the apron on my resto video.
Especially at 10:58.
Dave H.
https://www.youtube.com/watch?v=UW-cSGzyKXs
> On 08/24/2020 6:32 PM Greg Blake via Fot <fot@autox.team.net> wrote:
>
>
> Folks. Need some help with the shape of the lower section (below the grill
> opening) of the front apron on a large mouth TR3. I cut up and welded new
> metal on the front of the race car and Iâ??m pretty sure it is no where near
> the stock profile.
>
> My 14 year old son and I are rebuilding his 3 and it has obviously met a few
> curbs in it day. The lower section is folded back and I donâ??t have a good
> goby to make templates.
>
> Can one of you fellow 3 care takers send us a to scale profile of that lower
> section? I think one for middle and one for each side just inside the bumper
> plinths would get us close enough. Iâ??d really appreciate the help, so would
> Will the owner.
>
> Attached is a photo of Will working the rear corner that had 1/2â?? of bondo
> when we stepped the car. He is grinding off the remnants of the studs he
> used to pull the dent properly
>
> Thanks.
>
> Greg
>
> Sent from my iPhone_______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/dlhogye@comcast.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|