fot
[Top] [All Lists]

Re: [Fot] TR head cracks

To: Doug Mitchell <dmitchel@sbcglobal.net>, Tony Drews <tony@tonydrews.com>, "fot@autox.team.net" <fot@autox.team.net>
Subject: Re: [Fot] TR head cracks
From: michael <mlcooknj@msn.com>
Date: Wed, 24 Dec 2014 14:23:00 -0500
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <kjqqc8sn7ywuc1nhr4v5oa3x.1419444232635@email.android.com> FILETIME=[083A4A00:01D01FAF]
Years ago, I remember taking a TR3 head to a place in Long Island City, New
York called Cool Weld.  Using a process called "cold welding" they patched a
combustion chamber. This wasn't a crack, it was a hole but it worked on cracks
as well.

That was my back-up head and it worked fine for several races and also for the
guy who bought the car.

Mike Cook

> Date: Wed, 24 Dec 2014 13:03:52 -0500
> From: dmitchel@sbcglobal.net
> To: tony@tonydrews.com; fot@autox.team.net
> Subject: Re: [Fot] TR head cracks
>
> You might check into an old-school technique of cold stitching. Not sure if
it works on a head, but have seen it done on blocks. Not cheap and intensive
work, but it can recover a block.
>
>
> Doug
> dmitchel@sbcglobal.net
> Sent from my mobile phone
>
> -------- Original message --------
> From: Tony Drews <tony@tonydrews.com>
> Date: 12/24/2014  12:27 PM  (GMT-05:00)
> To: fot@autox.team.net
> Subject: Re: [Fot] TR head cracks
>
> I received a picture of the head - the crack is to the point where if
> it grows any further there will be definite sealing issues on #2 and
> probably #3.B  I like this suggestion - a hole to stop the propagation
> and silver solder to seal it back up.B  I'll have to remember that one!
>
> When I went through the "cracked head" issue (mine wasn't
> repairable), someone suggested "stitching" which is a series of
> threaded plugs run through the crack.B  That's the only other fix that
> comes to mind.
>
> Cheers, Tony Drews
>
> At 05:53 AM 12/24/2014, MadMarx wrote:
> >You can stop the crack with a hole at its end and solder the crack with
> >silver solder.
> >Seems to work fine with a good success rate.
> >
> >Cheers
> >Chris
> >_______________________________________________
> >fot@autox.team.net
> >
> >http://www.fot-racing.com
> >
> >Donate: http://www.team.net/donate.html
> >Archive: http://www.team.net/archive
> >Forums: http://www.team.net/forums
> >Unsubscribe/Manage:
> >http://autox.team.net/mailman/options/fot/tony@tonydrews.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/dmitchel@sbcglobal.net
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/mlcooknj@msn.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>