This is not the "usual" situation. There are two cracks which have grown to
the point they are on the edge of the sealing area.
I can send a picture...
Rich Rock
________________________________
From: Tony Drews
Sent: 12/23/2014 11:44 AM
To: SpiwakD@aol.com; fot@autox.team.net
Cc: rikrock@aol.com
Subject: Re: [Fot] TR head cracks
Crack between the two water passages between 2 and 3 is common and
can be ignored. It's not a sealing surface.
Cheers, Tony Drews
At 07:30 AM 12/23/2014, SpiwakD@aol.com wrote:
>I need advice on repairing some cracks on a TR4 head between #2 and 3
>cylinders. Is it common and is it a real concern? Can it be repaired?
>_______________________________________________
>fot@autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/rikrock@live.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|