GT6 should be the same as TR6 pads. they both use the 16P caliper with 1/4"
pins. The later 16PB calipers can be fitted which have the later seal and
smaller 3/16" pins.
-Ed-
On Sunday, August 24, 2014 1:02 AM, Mark J Bradakis <mark@bradakis.com> wrote:
Late night foggy memory, but as I recall looking for GT6 pads is pretty limited.
But Datsun 240Z pads are almost a direct replacement, I think the retaining pin
holes need to be reamed out a hair.
mjb.
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com/
Archive: http://www.team.net/archive
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|