I just use a normal length bottoming tap and use a 1/4 socket extension to
reach the bottom. You'll want to find the right size socket to marry up with
the tap and then use some tape or something in case the socket wants to
separate from the tap upon removal.
> On Jan 8, 2014, at 8:57 AM, marty <trmarty@hotmail.com> wrote:
>
> Hi John. I have one I made up that you are more than welcome to borrow if
you
> would like. If so, email me your address and I can drop it in the mail.
>
>
>
> Marty
>
>
>> Date: Wed, 8 Jan 2014 09:46:04 -0500
>> From: johnstydo@gmail.com
>> To: fot@autox.team.net
>> Subject: [Fot] Extended bottoming tap for TR4 engine
>>
>> Does anyone have a tool source for a 1/2-13 extended bottoming tap to
reach
>> the four deep head studs on the TR4 pot? Looks like at least 6" OAL.
>> Any comments on the value of bottom-tapping blind holes to improve stud
>> holding? Thanks
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/trmarty@hotmail.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/ablake2@austin.rr.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|