Amici ! Currently building a TR3/4 engine with Carrillo rods.
The set came with the stock Carrillo bolts (called by them WMC/H11) and the
tech sheet says they must be torqued max 40lbs.
While the stock rods and bolts usually are torqued at 60 lbs.
So should I torque the Carrillos at 40 or 60 lbs then ?
Amici, thank you for your very valuable input (as always)!
Cheers
Alex
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|