I think probably .015" clearance is s good number to try.
----- Original Message -----
From: "Bill Babcock" <BillB@bnj.com>
To: "jim hearn" <jimhearn1@comcast.net>; <FOT@autox.team.net>
Sent: Friday, August 24, 2007 2:48 PM
Subject: Re: [Fot] Adjusting valves
> If the cam is ong duration you probably need at least .015" clearance. I
> use
> .022" intake and .025" exhaust on Peyote.
>
>
> -----Original Message-----
> From: fot-bounces+billb=bnj.com@autox.team.net on behalf of jim hearn
> Sent: Fri 8/24/2007 1:30 PM
> To: FOT@autox.team.net
> Subject: [Fot] Adjusting valves
>
> It has been suggested to me that the valves on my '74 TR6 may need other
> than the stock settings since it has a hotter cam. I don't know what the
> cam is but it is definitely a hotter cam. I have only had the car a short
> time so my primary mission is to make sure there are no extraordinarily
> tight or loose valves. May be I could get a feel for the general settings
> and take any tight or loose ones to that settings.
>
> [demime 1.01d removed an attachment of type application/ms-tnef which had
> a
> name of winmail.dat]
> billb@bnj.com
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
> _______________________________________________
> http://www.team.net/donate.html
>
> kaskas@cox.net
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|