Went down the street and measure a 240z 4sp that was laying around. The 4-5
change in a z car is supposed to be a bolt in so it should be similar in
size. If anyone is curious it is approx 31" long, bellhousing is integral,
the gearbox is a bit potbellied, 9" tall and ~8-1/4" wide about 14" from
the bellhousing. The shifter is all the way at the back, so something would
have to be done. By my [very] crude measurements, without jacking the car
up, it should fit in there. The 'pot belly' would still be in the Y area of
the chassis. Hmmm...
|