bricklin
[Top] [All Lists]

Re: [Bricklin] Doors & center caps

To: <treefrogno9@webtv.net>, john blair <jblair1948@cox.net>,
Subject: Re: [Bricklin] Doors & center caps
From: serge berube <serge.ber@sympatico.ca>
Date: Sun, 8 Nov 2009 01:47:47 +0000
i was thinking of that this summer ..the only thing was wondering if it would
worp door shell guess spot weld and tig weld it ..but still worried about that
lol

> From: treefrogno9@webtv.net
> To: jblair1948@cox.net; bricklin@autox.team.net
> Date: Sat, 7 Nov 2009 23:27:49 +0000
> Subject: Re: [Bricklin] Doors & center caps
>
> Didn't someone at one time weld a extension strip around the inside edge of
the door frame to double the width of the glue seam area? It seems like that
would give a much better bond to the door skin. It would add a little weight
to the door. But a wider metal contact area (Even if only done to the roof
area.) would have to be stronger if it was double the width, perpaired right
and modern glues were used. For E-T center caps you can try Whiteys Wheels
www.whiteyswheels.com in Hughesville Pa. Thanks
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Bricklin@autox.team.net
> http://autox.team.net/mailman/listinfo/bricklin
>
> You are subscribed as serge.ber@sympatico.ca
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>