If you don't have a local fastener specialty store you can try a speed shop
that caters to circle track guys, They use the 3/16 large head rivets all
the time. Buy the aluminum ones if they going thru fiberglass as the steel
ones have too much force and will break the glass.
Rick R
> Is anyone aware of where to purchase the Pop Rivets to hold down the door
air
> cylinder to the frame and the ones that hold the body panels to the frame?
I
> have been able to purchase some, but I have not been able to find ones
with
> the same size head. The ones on the door air cylinder are about 1/2 inch
> diameter.
>
> Greg 0036
|