Re: Air Tank pressure

[KINGALIONZ11370@aol.com]

If you are using one of the air tanks that is made by Terry Tanner, you can 
feel free to use the new pressure switch since the tank is very capable of 
holding 250 PSI.  The Tank is constructed of  3/8" rectangle tube steel with 
end 
plates of equal thickness.  The welds are checked and double checked for their 
ability to hold the pressure ( we check them at 160 PSI ).  The current 
pressure switch we use at the shop is rated for 135 PSI so the 10 extra PSI is 
not 
really going to hurt it.

John L