The 75 doors were designed without the inner catwhisker because it was found
that the inner catwhisker caused way too much drag (friction) and even with
the 74's the whisker flange was trimmed off of it so that the glass actually
had enough opening. I do not recommend welding a catwhisker support into
your 75 door since it will only cause you more problems in the long run.
John L
-----Original Message-----
From: owner-bricklin@autox.team.net
[mailto:owner-bricklin@autox.team.net]On Behalf Of High Tech Coatings
Sent: Thursday, May 15, 2003 7:05 PM
To: Seth
Cc: bl
Subject: Re: Glass
The 75 door does not have the piece that the inner cat whiskers attach to.
You could probably weld one in if you had your doors apart but they may
cause too much drag on the glass.
> Does the 74 catwhisker fit in the 75 door, because my window
> bounces on the inner trim when it is down, and an inner catwhisker
> would definitely resolve that.
>
> Seth
> #1544
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/bricklin
|