bricklin
[Top] [All Lists]

Re: more door ??? part ?

To: "John T. Blair" <jblair@exis.net>
Subject: Re: more door ??? part ?
From: "High Tech Coatings" <htc@MNSi.Net>
Date: Mon, 29 Jan 2001 07:17:58 -0500
----- Original Message -----
From: John T. Blair <jblair@exis.net>
To: <Bricklin@autox.team.net>
Sent: Saturday, January 27, 2001 12:21 PM
Subject: more door ??? part ?


> I was just looking at a 74.  On the inside of the door, they have a little
> metal box(ish) tube to accept a "inside" catwisker.  I think there is also
> an outside cat wisker that mounts to the horizontal bar that goes across
the
> window frame.
>
> 1. What is a 75 supposed to look like?  I don't have this tube.

The "tube" for the inner cat wisker was a 74 only item. I don't know if they
dropped it for 75 because of cost or that it didn't work well with the "new"
design of the window tracks.

> 2. I know the 75's have a plastic piping that goes around on the inside of
the window frame glued on?

 I hold the piping with just a touch of black weatherstrip adhesive in a few
spots and the rest is held in place by the window track. These are availeale
from most Bricklin parts suppliers (including me) for $20-40 a pair. The
'74's also had this 'piping'.

> 3. Is there only 1 cat wisker on the outside of the window.?

Yes only the outside. these are also an inexpensive item that sells for
between $35 and $70 a pair depending on where you get them.

///
///  bricklin@autox.team.net mailing list
///


<Prev in Thread] Current Thread [Next in Thread>