Greg,
Thank you and the others who responded! The information should
do the job!
Many thanks,
George
Greg Monfort wrote:
>
> >I have a schematic I generated so that I could rewire mine after it
> >shorted way back when. I also have the instructions from TT's air
> >door kit.
> >
> >When I made the drawing I didn't even bother to buzz out the OEM
> >harness since I already knew it was s**t, nor did I necessarily
> >match color coding since I ripped all the old wire out and started
> >with new. It should allow you to tag your own wire ends though.
> >
> >I faxed the info to George, but I haven't heard back as to whether
> >it was useful to him.
> >
> >GM
> >-----Original Message-----
> >
> >
> >>The other day someone posted a request for the door wiring
> harness.
> >I was out
> >>working on my car today and thought I'd look at mine.
> >>
> >>Well all the wires are there, but most of the switches have been
> >disconnected,
> >>so I have the same problem to other person had. If anybody has a
> >diag.
> >>I'd appreciate a copy of it. If not a diag. then how about each
> of
> >the
> >>switches and what wires go where.
> >>
> >>TIA
> >>
> >>John
> >
> >
> >
|