----- Original Message -----
From: "Michael R. Clements" <mrclem@telocity.com>
To: "Allendorfer, Peter" <Peter@regionofdoom.com>; "'John J. Stimson-III '"
<john@idsfa.net>; "'Scot Zediker '" <roadsterboy@earthlink.net>
Cc: "'Loughmiller, Scott '" <scott@radiate.com>; "''Mark J. Andy' '"
<marka@telerama.com>; <ba-autox@autox.team.net>
Sent: Monday, October 15, 2001 8:16 AM
Subject: RE: 2500 lb Miata?
> Am I the only person who finds this shorter vs. taller terminology
confusing?
Most likely not. I had trouble with it for a while too.
> Does shorter mean a larger numeric ratio (lower gear), or a smaller
numeric
> ratio (higher gear)?
Shorter = higher numeric ratio.
> Over the years I think I've heard people use these terms both ways, which
is
> why it's confusing.
The above is the generally accepted definition, at least in the circles I
run with.
Scot
----------------------------------------------------------------
We make attorneys affordable.
http://www.prepaidlegal.com/go/szediker
|