ba-autox
[Top] [All Lists]

Re: GGF 8/27 Talkabouts Channel ?

To: Giles Douglas <giles@quote.com>
Subject: Re: GGF 8/27 Talkabouts Channel ?
From: "Michael R. Clements" <mrc01@flash.net>
Date: Mon, 28 Aug 2000 10:18:45 -0700
True, if there is interference you need to pick a non-zero
squelch code. But if the airwaves are clear, using zero gives you
better reception.

Giles Douglas wrote:
> 
> However squelch code 0 means no squelch, so what you should do is pick a
> squelch code other than 0. 0 will receive any transmission on the channel
> you've chosen (which is also a compatibility feature with the older models -
> you can listen, but you can't send).
> 
> At least, this is how mine work (it gets amusing when skiing and you set it
> on 0 - it appears every person on the mountain has one of the damn things!)
> 
>         Giles
> 
> -----Original Message-----
> From: owner-ba-autox@autox.team.net
> [mailto:owner-ba-autox@autox.team.net]On Behalf Of Michael R. Clements
> Sent: Sunday, August 27, 2000 6:17 PM
> To: Toy4speed@aol.com
> Cc: ba-autox@autox.team.net
> Subject: Re: GGF 8/27 Talkabouts Channel ?
> 
> They have 14 channels and each channel has 36 "squelch codes".
> That is 504 combinations, all of which are independent and
> non-interfering with each other. They work pretty well at all
> settings, but the best transmission range & quality seems to be
> on channel 7, squelch code 0.
> 
> Toy4speed@aol.com wrote:
> >
> > Hey All:
> >
> > Are the Talkabouts the 14 channel walkie talkies ?  What channel would be
> > used ?
> > I understand the newer models have "subchannels".  Could we stay on the
> basic
> > channels so owners of the older models without subchannels also tune in ?
> >
> > Don Lew
> > DSP #179 Supra
> 
> --
> Michael R. Clements
> mrc01@flash.net
> Criminals prefer unarmed victims.
> Politicians prefer unarmed peasants.
> I am none of the above.

-- 
Michael R. Clements
mrc01@flash.net
Criminals prefer unarmed victims.
Politicians prefer unarmed peasants.
I am none of the above.

<Prev in Thread] Current Thread [Next in Thread>