alpines
[Top] [All Lists]

Re: Glass beading questions?

To: Dan Eiland <deiland1@elp.rr.com>
Subject: Re: Glass beading questions?
From: Larry Paulick <larry.p@erols.com>
Date: Mon, 21 Apr 2003 17:04:39 -0700
Dan, bead blasting fiberglass will take the gel coat off, even at low 
pressure, and really is not recommended.  Go to Eastwood for the proper 
media, and look for it locally if you don't want to use Eastwood.

Alum parts, manifold, brake parts and the like can be bead blasted on 
the outside, but not internal or machined surfaces.  Make sure you clean 
everything very well so you don't have bead material residue into the 
engine or brake lines.

Larry

Dan Eiland wrote:
> Hi Listers,
> 
> I was getting ready to glass bead some fiberglass parts in my blast cabinet
> and was wondering if this process will harm the parts in any way? Are there
> any parts on a car that should not be glass beaded? I have been cleaning
> some of my smaller parts this way with excellent results. But, got to
> thinking about fiberglass or for that matter parts such as Brake parts where
> contamination may be of concern. Any assistance is always appreciated.
> 
> Thanks,
> Dan Eiland

<Prev in Thread] Current Thread [Next in Thread>