Re: Zenith Carb Throttle Shaft Bushing

[chuck nicodemus <armorseal@iccom.com>]

Paul Heuer wrote:

> Ivan,
> There is no bushing there to begin with but...
> I had my twin Zeniths rebuilt, and the throttle shafts needed bushed. The
> rebuilder reams out the body of the carb and presses in some inserts to suit
> the diameter of the shafts. Quite a common operation for old carbs.

Didn't someone a couple of years ago say something about making the shafts out
of alum arrow shafting. They are strong, solid and can be machined?
chuck