I thought I would alert both groups before going the eBay route. This is a
somewhat used but very usable flywheel. It has been modified so it can
take a 7.5 inch Tilton or QuartMaster clutch. The ring gear is in good
shape. I had it machined so the holes for the bolts to the crankshaft
could be fitted with steel inserts thus keeping the holes from elongating.
I have included a clutch face ring machined for the 7.5 clutch as well as a
new stock ring.
Will sell fro $200 plus shipping.
Pictures are available at :
https://plus.google.com/photos/103241823961257430252/albums/6075757007748907905?authkey=COiPqJ3YmtCh0gE
Chuck Arnold
_______________________________________________
Archive: http://www.team.net/archive
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
|