The guy I get POR from claims the stuff will tighten up a worn thread. He says
you should fill all the threads and tap to make them seal and snug up better.
> From: dwaldorf@cinci.rr.com
> To: 6pack@autox.team.net
> Date: Thu, 26 Aug 2010 15:27:05 -0400
> Subject: Re: [6pack] POR on threads (apackard68@att.net)
>
> I would never use a cordless drill with a tap. Taps are VERY hard, and
will
> cross thread and cut into the captive nuts easily, ruining them. You're
> also running the risk of breaking the (brittle) tap off in the nut.
>
> This is something that should be done manually with a tap handle, backing
> the tap out out a 1/4 turn occasionally to be sure there's nothing
> interfering with the threads.
>
> --Dave Waldorf
> _______________________________________________
>
> 6pack@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/6pack/slbridge@hotmail.com
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|