I have pretty much finished my rebuild on a TR6.
I had to replace the steering rack with another used one.
The steering wheel has to turn a few degrees before the rack will move the
tires.
Is there anyway to tighten up this play?
The moss catalog shows a shim under the bolt where the gound wire attaches to
the rack below the universal joint that hold the lower steering column.
Will putting in a shim tighten it up.
Thanks,
Al
Pics of TR6 project at
http://s246.photobucket.com/albums/gg107/6parts/?newest=1
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|