Dick:
Sounds like a good plan! Thanks for all your help (as usual)
Best,
Jim
-----Original Message-----
From: Sally or Dick Taylor [mailto:tr6taylor@webtv.net]
Sent: Sunday, May 11, 2008 12:38 AM
To: James Henningsen
Cc: 'Bill & AnnaBelle'; 6pack@autox.team.net
Subject: RE: [6pack] Hardtop Fix Question
Jim---Call TRF and tell them you'll sell them a few dozen of these.
Cover your expenses!
Dick
E-mail message
From: trguy@cfl.rr.com(James Henningsen)
Dick and Bill:
Thanks for your responses. McMaster does have square weld nuts
(5/16"x24)for $7.75 per 50 - Part Number: 93975A220. It looks like the
measurements will be about the same as the original nut so I will give
it a shot before creating my own with the drill and tap. If it works,
the NUTS are on me, excluding shipping of course, for those who need a
couple. I'll keep you posted on the progress.
Jim Henningsen
Maitland, FL
75 TR6
-----Original Message-----
From: Bill & AnnaBelle [mailto:anabil007@comcast.net]
Sent: Saturday, May 10, 2008 5:03 PM
To: Sally or Dick Taylor; James Henningsen
Cc: 6pack@autox.team.net
Subject: Re: [6pack] Hardtop Fix Question
Or goto http://www.mcmaster.com
They have them and will ship small quantities ... look for square weld
nuts
...
--
Bill Pugh
anabil007@ comcast.net
Wallace, CA
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|